How to protect the switching power adapter

Issue Time:2019-05-10
1.The contemporary communication switching power adapter is unattended, all have short-distance monitoring compliance, such as remote signaling, telemetry, remote control, and the associated signal line interface has a long communication interval, which is very easy to suffer. In the event of a downtime, etc., in accordance with the letter of the manufacturing department, the corresponding signal lightning arrester should be installed to return it.

2.The installation of DC lightning arrester was recently proposed in the lightning protection scale, because the residual voltage of the DC lightning arrester is much lower than the AC lightning arrester, so it can effectively improve the communication equipment in the communication switching power supply station. The material of the lightning electromagnetic pulse.

3.The lightning protection of the lightning protection device intervention method has a close relatives, if the lead inductance will produce extraordinarily residual pressure, should roughly shrink the connection between the power line and the lightning arrester and the lightning arrester and grounding sink The length of the board connection.

4.The multi-level placement of the lightning arrester can reduce the extra residual voltage caused by the lead inductance. Because the front-end lightning protection device has discharged the large-scale lightning current to the sky, the lightning protection device in the latter stage only releases one less. The lightning current of the department and the reduction of the lightning current must cause the additional residual voltage on the lead to decrease. In order to ensure the energy coordination of the front and rear stages of the lightning arrester, the length of the power cable between the lightning arresters should be no less than 15 meters, otherwise the decoupler should be accepted to develop energy cooperation.

5.The lightning protection of incoming power cables is easy to attract attention, while other power lines that enter and exit communication stations are often viewed squarely, such as lighting street lights, tower lamp power lines, and non-telecom facilities to lease telecom power lines. At present, it is advisable to adopt solar tower lights, which can reduce a lightning strike invasion channel. Other outgoing power lines should be within the area of ​​concern of the lightning protection system, otherwise special lightning protection flashbacks should be adopted.

Shenzhen Lianyunda Electronics Co., Ltd. has more than 800 kinds of AC/DC, DC/DC, AC/AC and other products, covering 1W to 800W, and even higher or higher power and requirements for customers. Widely used in LED lighting. LCD monitor, LCDTV, DVR monitoring, DVB, monitoring system, electronic refrigerator, electric vehicle charging, small appliances, medical equipment, industrial equipment, audio-visual film, massage beauty, digital communication, railway Systems and other fields.

News Group
Related Resources
Is There A Problem?
LYD Will provide you with more intimate service in OEM support
Request customization
Please send your enquiries to us
Contact LYD
Please send your message to us

Agree to use terms of service